C24B550U / C24B750X / C27B750X User Manual The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00219A-09...
Table of Chapter. 1 Chapter. 3 BEFORE USING THE USING SMART STATION Contents PRODUCT What is Smart Station? Read the Following before Using Copyright the Wireless Connection / USB Hub Securing the Installation Space Functions Safety Precautions Software Installation for Using Symbols Smart Station Cleaning...
SCREEN SETUP Key Repeat Time Configuring Key Repeat Time Image Size Off Timer On/Off MAGIC Configuring Image Size Configuring Off Timer On/Off SAMSUNG MAGIC Bright H-Position Off Timer Setting SAMSUNG MAGIC Color Configuring H-Position Brightness Configuring Off Timer Setting V-Position Reset...
PC - for Series 7 only Screen Configuring HUB in the Initial Screen Chapter. 13 APPENDIX Chapter. 11 Contact SAMSUNG WORLD WIDE TROUBLESHOOTING GUIDE Responsibility for the Pay Service (Cost to Customers) Requirements Before Contacting Correct Disposal Samsung Customer Service Center...
Instructions marked by this symbol must be followed. High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Contact your nearest Samsung Customer Service Center if you want to clean the inside of the product (Service fee will be charged.)
B efore Using the Product Electricity and Safety Cleaning The following images are for reference only. Real-life situations may differ from what is The following images are for reference only. Real-life situations may differ from what is shown in the images. shown in the images.
Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.) Only use the power cable provided with your product by Samsung. Do not use the power cord with other products. The product may fall and become damaged and/or cause an injury.
SAMSUNG extended period of time) may seriously affect its performance. Be sure to consult Samsung Customer Service Center if you want to Do not install the product within the reach of young children. install the product at such a place.
If the product is dropped or the outer case is damaged, turn off the power Do not use or keep combustible spray or an inflammable substance near switch and disconnect the power cable. Then contact Samsung Customer the product. Service Center.
B efore Using the Product Caution Do not leave the DC power adapter near a heat source. Otherwise, a fire may result. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. If you are not going to use the product for an extended period of time, Keep the DC power adapter in a location with good ventilation.
B efore Using the Product Correct posture to use the product Store small accessories out of the reach of children. Use the product in the correct posture as follows: • Straighten your back. Do not place heavy objects on the product. •...
Chapter. 2 Preparation Unpacking the Smart Station 2. Remove the styrofoam from the product. Removing the Packaging The appearance of the actual product may differ from the images shown. 1. Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument.
Preparation Checking the Components Using the components • Mobile cable Contact the vendor where you purchased the product if any components are missing. Use this cable to connect a mobile device or secondary PC to the product to enable the The appearance of the components and items sold separately may differ from the image mobile control and MHL functions.
Preparation Key features Parts • USB Display feature This feature displays output to the screen through a USB cable (page 30). Front Buttons • USB HUB This feature can be used after connecting a mobile device, USB memory, keyboard, or The color and shape of parts may differ from what is shown.
Preparation ICONS DESCRIPTION ICONS DESCRIPTION Move to the upper or lower menu or adjust the value for an Open or close the onscreen display (OSD) menu, or return to option on the OSD menu. the parent menu. Adjust the Brightness, Contrast using the [ ] buttons when...
Preparation Rear View Side The color and shape of parts may differ from what is shown. Specifications are subject to The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. change without notice to improve quality.
Preparation Adjusting the Product Tilt PORTS ABOUT PORTS Connect to a source device using a USB 2.0 cable. The color and shape of parts may differ from what is shown. Specifications are subject to NOTE change without notice to improve quality. High-speed charging is not possible using this port.
Chapter. 3 Using Smart Station USB Display / USB Hub What is Smart Station? Using older monitors can be inconvenient when using the USB Hub function because you need to connect a USB cable in addition to a display-output cable (D-sub, DVI, etc.). Smart Station refers to an advanced-concept monitor that offers enhanced usability by The USB Display feature of the Smart Station monitor enables the USB Hub and display output providing useful new functions such as...
Google Play Store. single USB cable. Applications that support multiple languages can be found on the Samsung Electronics website (http://www.samsung.com). 3. Using the USB Hub function is not possible if only an HDMI or HDMI-DVI cable is connected (without a USB cable connected).
To use the product, install on your PC the software provided with the product. When installing the software for the first time, follow the "Automatic Installation" instructions. To maximize the performance of the Smart Station monitor, visit www.samsung.com and upgrade the driver periodically.
Run the provided CD, then select the desired language. Removable media device drive and check the software. Finally, double-click the software to Click SAMSUNG Smart Station to install the program manually. proceed with installation. Alternatively, install using the software program on the provided NOTE •...
Using Smart Station Automatic installation when using a desktop NOTE • Do not remove the cable or turn off the product until install is complete. • Even if the USB cable is connected, the PC screen will not be displayed on the monitor until the 1.
Run the provided CD, then select the desired language. • Check that the USB 3.0 or HDMI cable is properly connected. Click SAMSUNG Smart Station to install the program manually. • Only Series 7 has an internal speaker. • Adjust the sound output port settings according to the conditions where the product is NOTE used.
If the provided CD is missing or the latest version driver is needed, download the latest • When multiple display output ports on the PC are connected to the product at the same time, each driver from www.samsung.com. display signal output depends on the system specifications of the PC.
Using Smart Station Connecting to a PC Using the Wireless- NOTE connection Dongle - for Series 7 Only • If a wireless connection cannot be established, double-click Wireless Connection Manager installed on the PC to connect to a detected monitor. •...
Using Smart Station Using Wireless Connection (Wireless Connection 4. Run Wireless Connection Manager. A list of monitors you can connect to will appear. Double-click or right-click the desired monitor. Next, select Connect. Manager) Wireless Connection Manager is for Series 7 only. The Wireless Connection Manager program allows you to connect your PC to the Smart Station monitor wirelessly.
Using Smart Station Using the Wireless-connection Dongle as a Hub Wireless Connection is supported on Series 7 only. For details on how to use a USB cable as a hub, refer to "Using the Product as a USB Hub" (page 31). Connect various source devices (peripherals, etc.) to the product using it as a hub.
Using Smart Station LAN Connection - Wireless LAN disconnection You can remove the LAN cable using a flat-head screwdriver or ruler. Wireless Connection is supported on Series 7 only. For details on how to establish a LAN connection using a USB cable, refer to “LAN Connection - Wired(page 32)”.
Using Smart Station Connecting to a PC Using a USB Cable To connect to a PC using a USB cable 1. Connect the USB cable to the product and PC. For details on how to establish a wireless connection using the wireless-connection dongle, refer to "Connecting to a PC Using the Wireless-connection Dongle"...
Using Smart Station Using the Product as a USB Hub For details on how to use the wireless-connection dongle as a hub, refer to "Using the Wireless-connection Dongle as a Hub" (page 28). Using the product as a hub, connect and use various source devices with the product at the same time.
Using Smart Station LAN Connection - Wired Monitor IP Setup The Smart Station function allows you to access the Internet from your PC by connecting the LAN cable to the product (when connected to a PC). There is no need to directly connect the 1.
Using Smart Station NOTE When using the LAN network of the Smart Station monitor or PC, ensure you connect the LAN cable to only one of the two networks. If you connect the LAN cable to both networks, a system crash may occur. 1.
Using Smart Station 4. After setting the IP, click OK. When the following message appears, click No. NOTE 2. Right click on the network device of the Smart Station monitor (displayed as LAN9512/ • A static IP address is assigned to a single network device. The above message appears when the LAN9514 USB 2.0 to Ethernet 10/100 Adapter), and select Enable.
Using Smart Station About Mobile Control Mode What is Mobile Control? ] Charging/Control Mode • [ The Mobile Control program allows you to control a device (smartphone, tablet, notebook PC, etc.) connected to the Smart Station monitor using a keyboard and mouse connected to the Smart Station monitor or PC.
Using Smart Station Using the Mobile Control If the PC is connected to the product, Mobile Control and After the software is installed, the Mobile Control icon will Connect your PC to the product using the wireless-connection Wireless Connection Manager will automatically install. dongle or a USB cable.
Using Smart Station Connecting and Using Devices by Type NOTE Before connecting to your mobile device, check that the Mobile Control icon is found on the far right side Check the proper instructions for the device you will be using. of the taskbar.
Using Smart Station Android tablet NOTE * When your mobile device has a normal USB port • If your tablet has a Micro USB port, you can use the same connection method as the Android smartphone. Refer to “Android smartphones”(page 37). Mobile devices should be purchased separately.
Using Smart Station Connecting to two PCs NOTE Wired connection Wireless connection (for Series 7 only) • Charging/Control Mode is not supported and battery charging is not possible. • Before connecting to your mobile device, check that the Mobile Control icon is found on the far right side of the taskbar.
Using Smart Station Changing the Settings Changing the position of a PC (Mobile Control) 1. Right-click on the Mobile Control icon on the far right side of the taskbar. When connected to two PCs The following context menu items will appear. 1.
Using Smart Station To Transfer files between two PCs(Desktop - Note PC) Using the Mobile-device Holder Transfer files between two PCs, such as a desktop PC and a notebook PC, conveniently by You can use the mobile-device holder provided in the package when connecting a mobile dragging and dropping the files. device to the product.
Chapter. 4 Using MHL MHL (Mobile High-Definition Link) • Since the display size of the product is larger than those of mobile devices, the picture quality may degrade. • This product is officially MHL-certified. In the event of a problem with a mobile device connection, contact the mobile device manufacturer.
Using MHL Using MHL 4. If the following message appears, MHL mode is activated. After about 3 seconds, the MHL screen will be displayed. HDMI / USB / Wireless Connection [MHL] 3 sec later MHL activated. • Wireless Connection is displayed on Series 7 only. NOTE MOBILE The indicated time "after 3 seconds"...
Using MHL Disabling MHL When the mobile device is not connected or does not support MHL When the cable is disconnected or the mobile device is NOTE powered off • Mobile Control and MHL are not supported at the same time. If the mobile cable is disconnected or the mobile device is powered off when MHL is active, •...
Chapter. 5 Connecting and Using a Source Device Pre-connection Checkpoints Checklist before Connecting to Check the available ports on the back of the source device. Source Devices Refer to the user manual for the source device when connecting it to the product. The number and locations of ports can vary depending on the source device.
Connecting and Using a Source Device Connecting and Using a PC Connection Using an HDMI Cable (Digital Type) Connecting to a PC Select a connection method suitable for your PC. Connecting parts may differ in different products. HDMI IN HDMI OUT Connection Using an HDMI-DVI Cable 1.
• You can set the optimum resolution and frequency for this product by installing the corresponding drivers. ITEMS SPECIFICATIONS • An installation driver is contained on the CD supplied with the product. • If the provided file is faulty, visit the Samsung Electronics homepage (http://www.samsung.com) and CPU Core Core2Duo download the file. CPU Speed 2.2 GHZ...
Connecting and Using a Source Device Setting Optimum Resolution Changing the Resolution Using a PC An information message about setting optimum resolution will appear if you power on the NOTE product for the first time after purchase. • Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. Select a language on the product and change the resolution on your PC to the optimum •...
Connecting and Using a Source Device Changing the Resolution on Windows Vista Changing the Resolution on Windows 7 Go to Control Panel Personalization Display Settings and change the resolution. Go to Control Panel Display Screen Resolution and change the resolution.
Connecting and Using a Source Device Connecting to a Video Device Connecting to an Audio Output Device The product can be connected to a video device. Connecting parts may differ in different products. Connection Using an HDMI Cable HDMI IN HDMI OUT 1.
MAGIC Game Cinema Dynamic Contrast You can customize the screen brightness and tint to suit your preferences. SAMSUNG MAGIC Bright Return Adjust Enter • Custom: Customize the contrast and brightness as desired. This menu provides an optimum picture quality suitable for the environment where the •...
MAGIC SAMSUNG Color is a new picture-quality improvement technology developed independently by MA GIC SAMSUNG Brignt Dynamic MAGIC Samsung Electronics. It delivers vivid natural colors without picture quality degradation. Standard SAMSUNG Color MAGIC Movie Custom NOTE SAMSUNG Not available if...
Adjust the contrast between the objects and background. (Range: 0~100) A higher value will make the picture appear brighter. A higher value will increase the contrast to make the object appear clearer. NOTE NOTE SAMSUNG SAMSUNG Not available if Bright is in Dynamic Contrast mode.
• It is recommended to set the response rate to Normal Faster when you are not viewing a video. • The functions available may vary depending on the product model. Refer to the actual product. SAMSUNG • Not available if Bright is in Cinema Dynamic Contrast mode.
Screen Setup HDMI Black Level If you connect a DVD player or set-top box to the product using an HDMI cable, the contrast and color may degrade making the picture look darker. If this is the case, correct the degraded picture quality using the HDMI Black Level menu.
Chapter. 7 Configuring the Tint Settings Adjust the tint of the screen. Information in this chapter is not applicable if SAMSUNG B right is in Cinema Dynamic Contrast mode. MA GIC Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color.
Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. A higher value will increase the intensity of the color. NOTE NOTE SAMSUNG SAMSUNG Not available if Color is in...
Configuring the Tint Settings Color Tone Gamma Adjust the mid-range brightness (Gamma) of the picture. NOTE SAMSUNG Not available if Color is in Full Intelligent mode. MA GIC Configuring Gamma Configuring Color Tone 1. Press [ ] on the product. 2. Move to...
Chapter. 8 Resizing or Relocating the Screen Image Size mode SIZE&POSITION Image Size 16:9 Change the picture size. H-Position Screen Fit V-Position NOTE Menu H-Position Menu V-Position The available Image Size menu options depend on the setting of PC/AV Mode under SETUP&RESET.
Resizing or Relocating the Screen H-Position V-Position Move the screen to the left or right. Move the screen up or down. NOTE NOTE • Available only when PC/AV Mode is set to AV. • Available only when PC/AV Mode is set to AV. •...
Resizing or Relocating the Screen Menu H-Position Menu V-Position Move the menu position to the left or right. Move the menu position up or down. Configuring Menu H-Position Configuring Menu V-Position 1. Press [ ] on the product. 1. Press [ ] on the product. 2.
Chapter. 9 Setup and Reset 4. Move to Auto Wireless Detection using the [ ] buttons. Next, press the [ ] button. The following screen will appear. Series 7 Configure the settings to use the HUB function on the product. NOTE Auto Wireless Detection 한국어...
Setup and Reset USB Super Charging Select Source Charge the battery of a connected source device quickly using the blue USB 3.0 port on the Select the input source that will be displayed on the product. product. NOTE Changing the input source using Select Source •...
Setup and Reset Wireless ID - for Series 7 only Eco Saving Wireless ID refers to a unique ID assigned to each product. The Wireless Connection Manager program identifies products within an effective range by detecting this unique ID of Adjust the power consumption of the product to save energy.
Setup and Reset Menu Transparency Language Configure the transparency for the menu windows. Set the menu language. NOTE Configuring Menu Transparency • A change to the language setting will only be applied to the onscreen menu display. • It will not be applied to other functions on your PC. 1.
Setup and Reset PC/AV Mode Auto Source PC/AV Mode to AV. The size of the image displayed on the screen will be enlarged. Enable/disable Auto Source mode that detects the input source automatically. This option is useful when viewing a movie. Configuring Auto Source NOTE PC/AV Mode...
Setup and Reset Display Time Key Repeat Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for Control the response rate of a button when the button is pressed. a specified period of time. Configuring Key Repeat Time Display Time can be used to set the time after which you want the OSD menu to disappear...
Setup and Reset Off Timer On/Off Off Timer Setting You can set the product to automatically turn off. The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. Configuring Off Timer On/Off NOTE Available only when...
Setup and Reset Reset Return all the settings for the product to the default factory settings. Restoring the default settings (Reset) 1. Press [ ] on the product. 2. Move to SETUP&RESET using the [ ] buttons. Next, press the [ ] button.
Chapter. 10 INFORMATION Menu and Others INFORMATION Configuring Brightness and Contrast in the Initial Screen View the current input source, frequency and resolution. Viewing information (INFORMATION) Adjust the Brightness Contrast setting using the [ ] buttons in the initial screen (where no OSD menu is displayed). 1.
INFORMATION Menu and Others Configuring Volume in the Initial Configuring HUB in the Initial Screen Screen Press the [ ] button on the stand when no OSD menu is displayed. The menu window will be displayed. Adjust the Volume setting using the [ ] buttons in the initial screen (where no OSD menu is 1.
Samsung Customer Service Center message "Not Optimum Mode" will appear briefly. Check the following. Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Installation issue (PC mode) Testing the Product TROUBLESHOOTING SOLUTIONS Check if your product is operating normally by using the product test function.
Troubleshooting Guide Audio issues TROUBLESHOOTING SOLUTIONS * The integrated speaker is provided on Series 7 only. The message "Not This message appears if the signal from the graphics card Optimum Mode. " exceeds the maximum resolution or frequency for the product. TROUBLESHOOTING SOLUTIONS appears on the screen.
If the product is found, select The PC does not need to be turned on. Connect and check if it is connected. 4. Check the driver and update status. Wireless Connection does not work properly, update the driver to the latest version from www.samsung.com.
Control. Compatible devices include PCs that support the Windows operating system QUESTION ANSWER and Samsung Galaxy S2 series and later. How can I change the Set the frequency on your graphics card. To find whether your device supports the frequency? host function, contact the manufacturer.
Troubleshooting Guide QUESTION ANSWER How do I set power- • Windows XP: Set power-saving mode in Control Panel Appearance and Themes Display Screen Saver saving mode? Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power-saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC.
Chapter. 12 Specifications General Maximum Pixel Clock 165 MHz (Digital, USB) This product uses 100 to 240V. Power Supply Refer to the label at the back of the product as the standard voltage can vary in different countries. Model Name C24B550U C24B750X C27B750X...
To find the nearest recycling location, go to our website: on, press any key on the keyboard or move the mouse. Power-saving mode functions only www.samsung.com/recyclingdirect or call, (877) 278 - 0799 when the product is connected to a PC that has a power-saving function.
Specifications Preset Timing Modes Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. This product can be set to only one resolution for each screen size to obtain the optimum Horizontal frequency is measured in kHz.
Contact SAMSUNG WORLD WIDE 800-SAMSUNG(726-7864) CHILE http://www.samsung.com From mobile 02-482 82 00 COLOMBIA 01-8000112112 http://www.samsung.com NOTE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG http://www.samsung.com/latin customer care Center. (Spanish) COSTA RICA 0-800-507-7267 http://www.samsung.com/latin_en NORTH AMERICA (English) U.S.A...
(+30) 210 6897691 from mobile and http://www.samsung.com (English) land line http://www.samsung.com/latin 800-SAMSUNG (800-726786) http://www.samsung.com (Spanish) CZECH PANAMA 800-7267 Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská http://www.samsung.com/latin_en 394/17, 180 00, Praha 8 (English) DENMARK 70 70 19 70 http://www.samsung.com PERU 0-800-777-08 http://www.samsung.com EIRE 0818 717100 http://www.samsung.com...
• If a product is reinstalled or devices are connected additionally after installing the purchased product for the first time. SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com • If a product is reinstalled to move to a different spot or to move to a different house.
• External impact or drop. (Applicable in countries with separate collection systems) • Use of supplies or separatly sold product unspecified by Samsung. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed •...
Appendix Grey scale Terminology Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen. Changes to the screen brightness are expressed with black and white variation, and grey scale refers to the medium area between black and white. OSD(On Screen Display) Changing the grey scale through Gamma adjustment will change the medium brightness on the screen.
Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the level of display detail. A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time. E.g. A resolution of 1920 x 1080 consists of 1920 horizontal pixels (horizontal resolution) and 1080 vertical lines (vertical resolution).
Index Auto Source Disabling MHL Language Display Time Blue MAGIC Brightness Gamma Menu H-Position General Menu Transparency Green Menu V-Position Monitor IP Setup Changing the Settings Cleaning Color Tone HDMI Black Level Components H-Position Configuring Brightness in Off Timer On/Off the Initial Screen Off Timer Setting Configuring HUB in the...
V-Position Requirements Before Contacting Samsung Customer Service Center Reset Response Time What is Mobile Control? What is Smart Station? Wireless transmitter/receiver 78 Safety Precautions Sharpness Software Installation for Using Smart Station Terminology Troubleshooting Guide Unpacking the Smart Station 13 Using MHL...