NUCLEONIX SYSTEMS RC 705E Instruction Manual page 3

IMPORTANT NOTE :
1. It is important to read the instruction manual thoroughly before
operating the unit.
2. Nucleonix will in no way be liable for any damages or losses or
consignment rejections either due to improper usage of this
equipment or any other reason.
3. Only Sr. Technicians who are fully trained by Nucleonix Systems or
otherwise & have complete understanding of measurements of RaC
using this meter only need to operate and make measurements on
regular basis.
4. Users are advised to keep updating their measurement methods,
whenever Nucleonix sends updates. They can periodically check
Nucleonix website for new methods & products.
5. Detector cable and data cable are to be connected only when RAD
check meter is in switch OFF condition.
6. Also it is good practice to get the Rad Check Meter calibrated once in a
year.
7. Equipment electronics, has 1 year warranty Scintillation detector probe is
fragile & has glass ware (PMT). This doesn't have 1 year warranty, only
inspection warranty is offered. Also this detector warranty doesn't cover
physical damage, breakage internal cracks which may develop due to
dropping or shock to the instrument. Users are advised strictly to train &
inform their technicians who operate this product about this.
8. Always use protective belt for detector probe to the shoulder, in case of
Rad Check with external detector probe.
9. To open the top cover, for battery replacement or for maintenance
unlatch top cover & gently open the top cover to separate it from the
bottom cover, If not opened gently, one may break wire connection of the
main PCB.