Download Print this page

Introduction; Safety Information - PCE Instruments PCE-DT 50 Instruction Manual

Advertisement

1. Introduction

Thank you for purchasing the PCE-DT 50 from PCE Instruments.
have decided. The hand tachometer PCE-DT 50 is excellent for the fast
suitable for speed control. The PCE-DT 50 non-contact measures the rotational speed from
moving objects such as drives, shafts, pinions, etc. It uses a laser to do this,
which emits light, and a receiving diode which detects the light-dark contrast of the reflected light.
Light recognizes.

2. Safety information

Please read this User's Manual carefully and completely before using the unit for the first time.
for the first time. The device may only be used by carefully trained personnel.
personnel. Damage caused by non-observance of the instructions in the operating instructions
are created, are exempt from any liability.
- This measuring instrument may only be used in the manner and for the purpose described in this operating manual.
can be used in this way. If the meter is used for other purposes, it may cause
dangerous situations.
- In order to avoid injuries to the eyes of humans and animals, the laser must never be used in
in the appropriate direction.
- Use the meter only when the environmental conditions (temperature, humidity, etc.) are not suitable,
humidity, ...) are within the limits specified in the specifications.
Do not expose the unit to extreme temperatures or direct sunlight,
extreme humidity or wetness.
- Do not expose the device to shocks or strong vibrations.
- Opening the device housing may only be carried out by qualified personnel of PCE Germany.
GmbH can be made.
- Never use the meter with wet hands.
- No technical changes may be made to the device.
- The device should only be cleaned with a cloth. Do not use
Abrasives or cleaning agents containing solvents.
- The device may only be used with the accessories offered by PCE Deutschland GmbH.
or equivalent replacement.
- Before each use, check the housing of the measuring instrument for visible
Damage. If visible damage should occur, the device must not be
can be used.
- The measuring instrument must not be used in an explosive atmosphere.
- The measuring range specified in the specifications must not be exceeded under any circumstances.
will be exceeded.
- If the safety instructions are not observed, it may result in damage to the
device and injury to the operator.
We assume no liability for misprints and errors in the contents of this manual.
We expressly draw your attention to our general warranty conditions, which you can find in
our General Terms and Conditions.
If you have any questions, please contact PCE Americas. You will find the contact details at the
End of this manual.
© PCE Instruments

Advertisement

loading