Table of Contents
Advertisement
Coffee will begin to brew. After a short time, the hot coffee will start flowing into the
thermo jug.
When the brewing process is finished, the coffee machine automatically turns itself
off and the red heating indicator light goes off.
The coffee is ready to be served.
10. Remove the thermo jug from the bottom plate.
11. Screw the lid onto the thermo jug.
Overheating protection
The appliance is equipped with the overheating protection. If overheating occurs
during dry operation or scaling, it engages and switches the appliance off. When the
cause is removed, the coffee machine may be switched on again in order to restore
its operational readiness, by pressing the RESET button at the rear side of the
appliance.
6
Cleaning
6.1
Safety Instructions for cleaning
EN
•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
16 / 24
Cleaning
190184
Advertisement
Table of Contents
