Changing The Dishwashing Programme; Adding Dishes - Hanseatic HGTI4582C10T7736ES User Manual

Suitable for installation under units/can be semi-integrated
Hide thumbs Also See for HGTI4582C10T7736ES:
Table of Contents

Advertisement

Available languages

Available languages

Changing the dishwashing
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from the
door and do not hold your head or up-
per body directly above the open door.
Keep children and pets away from the
appliance when opening the door.
Make sure that children do not open
the door during operation.
(1)
(6)
(13)
You can interrupt an active dishwashing pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Press the button
(11) in order to inter-
rupt the dishwashing programme.
The remaining duration display (6) will
remain permanently illuminated.
2. If required, add extra dishwasher detergent.
3. Press the P (13) button until the programme
symbols (1) go out and the remaining du-
ration display (6) is set to 'zero'.
4. Select the new programme with the
P button (13).
5. Select additional options if required,
as described on the previous pages.
6. Start the programme.
Dishwasher operation

Adding dishes

CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
Maintain a suffi cient distance from the
door and do not hold your head or up-
per body directly above the open door.
Keep children and pets away from the
appliance when opening the door.
Make sure that children do not open
the door during operation.
You can add more dishes even if the dish-
washing programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
(11)
1. Press the button
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
6. Press the
After approximately 10 seconds the appli-
ance will continue the programme.
A signal tone will sound at regular
intervals while the dishwashing pro-
gramme is paused.
Page EN-25
(11) in order to inter-
button (11) once again.
(11)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hgu4582c10t7736ei9124253614440547

Table of Contents