Dishwasher Operation; Before Getting Started; Preparation; Protecting The Environment - Hanseatic HGTI4582C10T7736ES User Manual

Suitable for installation under units/can be semi-integrated
Hide thumbs Also See for HGTI4582C10T7736ES:
Table of Contents

Advertisement

Available languages

Available languages

Page EN-22

Dishwasher operation

Dishwasher operation

Before getting started

• Read chapter "Service" from page EN-4,
in particular the safety instructions.
• Set up and connect the appliance as
described in chapter "Installation, con-
nection and initial commissioning" from
page EN-29.
• Refill dishwasher detergents, rinse aids
and dishwasher salts or multi-tabs.

Preparation

1. Open the tap completely.
2. Close the dishwasher door.
3. Press the
button (18) to switch on the
dishwasher.
You will hear a signal tone and all LEDs will
illuminate briefly.
After a short time, the programme display
reading ECO (1) will show.

Protecting the environment

– The ECO programme is the most efficient
programme for cleaning normally soiled
dishes in terms of combined energy and
water consumption.
– If you keep to the maximum specified
capacity when loading your appliance and
you arrange the dishes correctly, energy
and water can be saved (see "Loading the
dishwasher" on page EN-17).
– Manual pre-rinsing of the dishes leads to
higher water and energy consumption and
is not recommended.
– Cleaning dishes in your appliance gen-
erally uses less energy and water than
washing by hand, provided you follow the
instructions in the user manual.
Selecting the dishwashing
programme
It is recommended that you carry
out a test run before the fi rst dish-
washer cycle in order to remove residues
from the manufacturing process and in
order to ensure that the appliance functions
perfectly. Carry out this test run when the
dishwasher is empty and without any dish-
washer detergent.
1. Select the suitable dishwashing pro-
gramme based on the 'programme table',
see page EN-21.
(1)
(6)
2. Press the P button (13) as often as re-
quired until the display shows the desired
programme symbol (1) and the pro-
gramme duration (6).
3. For the washing programme,
– if you wish to make further adjustments,
continue with "Additional options".
– if you wish to launch it, continue with
"Starting the dishwashing programme"
on page EN-24.

Additional options

You can combine the various dishwash-
ing programmes with additional options.
The additional options must be selected be-
fore starting the dishwashing programme.
(13)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hgu4582c10t7736ei9124253614440547

Table of Contents