Fluke i3000s Flex Series Instruction Sheet page 2

sales@GlobalTestSupply.com
i3000/i2000 English Instruction Sheet
• Protect the probe against water and humidity.
• Wear protective clothing and gloves as
required.
• Do not install this product on live conductors.
Always de-energize the circuit under test before
installing the flexible measuring head.
• Always inspect the electronics unit, connecting
cable, and flexible measuring head for damage
before using the Probe.
• Do not use the Probe if damaged.
• Always connect Probe to display device before
installing the flexible measuring head.
• Never change batteries while measurement
head is installed on conductor.
• Use only the provided original or specified
accessories.
Use the Current Probe only as specified in the
•
operating instructions; otherwise the current
probe's safety features may not protect you.
Adhere to local and national safety codes.
•
Individual protective equipment must be used
to prevent shock and arc blast injury where
hazardous live conductors are exposed.
CAT III equipment is designed to protect against
•
the transients in the equipment in fixed
equipment installations, such as distribution
panels, feeders and short branch circuits, and
the lighting systems in large buildings.
Fluke-Direct
Page 2
.com
1.888.610.7664