Car; Battery Test - Midtronics EBT-965P User Manual

EBT-965P
Use Car Test to test and verify the condition of customer batteries that are in-
or out-of-vehicle for possible return and/or warranty claim.
return to

Car

continue to the next step.

Battery Test

1. Battery Test Setup - Edit the displayed vehicle and battery information.
Location
Brand/Model
Battery Type
Battery Units
Battery Rating
When Exide, Tudor, Fulmen, Deta, Sonnak or Centra are selected at brand/model, the option
'rating' will change to 'P/N' , which leads to the part number list.
Rating
EN European Norms. The battery is required to meet a voltage of
7.5V after 10 seconds
SAE Society of Automotive Engineers norm. The test specifies that the
battery at a temperature of –18°C will deliver a current equal to
the Cold Cranking Amps for 30 seconds with the voltage staying
above 7.2 volts
DIN Deutsche Industrie-Norm
JIS Japanese Industrial Standard test, carried out at -15°C.
EN2 European Norms 2. Performing a different second discharge than
with EN.
IEC International Electrotechnical Commission norm. The IEC test is
performed at -18°C
CCA Cold Cranking Amps (specified by SAE): The amount of current a
battery can provide at 0 ºF
(–17.8 ºC).
Select Start to advance to the next screen.
2. Temperature - Hold the tester temperature sensor over the battery being tested.
www.midtronicseurope.com
2 – Car
the previous screen, select options and when necessary,
Inside vehicle Outside vehicle
Exide Tudor
Fulmen Deta
Sonnak Centra
Other
Flooded AGM
EFB AGM spiral
GEL
EN DIN
SAE JIS
 
Hold down or to increase scrolling speed.
Description
Press  to
EN2 CCA
IEC
2 – Car

to enter or
Range
100 to 3000
100 to 3000
100 to 1000
A list is shown
100 to 3000
100 to 1000
100 to 3000
9