Lutron Electronics TM-946 Manual page 17

Then LCD will change to
the following screen.
* During send the data out, if pressing the " Send button "
( 3-6, Fig. 1 ) once will stop the data send out
temporally.
* Pressing " Send button " ( 3-6, Fig. 1 ) once again will
send the data continuously.
* After data send out, pressing the " ESC button " ( 3-3,
Fig. 1 ) will return to normal screen.
5)If intend up load the data to the computer, then
should connect the optional RS232
cable/UPCB-02 or USB cable/USB-01 and
cooperate the Data Logger software ( optional,
Model : SW-DL2005 ).
XX
SEnd
272
15728
15
Value will increase up
from zero until reach
to the existing save
data no.
The data no. that are
saved into the memory.
Balance of empty
data no.