1)Pressing " R button " ( 3-7, Fig. 1 ) once, the display
will show as example :
00
minutes
adjustment
* The " seconds digits " will be flashed, use the " ▲
button "( 3-5, Fig. 1 ) "
adjust the desiring seconds value ( 0 to 59 ).
* Pressing " Sampling time button " ( 3-8, Fig. 1 ) once
again, the " minutes digits " will be flashed, use the "
button " ( 3-5, Fig. 1 ) "
▲
to adjust the desiring minutes value.
* Pressing " Enter button " ( 3-4, Fig. 1 ) once, both the
" seconds digits " and " minutes digits " will flashing
4 times then return to normal measuring screen,
the sampling time will save into the memory.
During the display flashing, if pressing the " ESC
button " ( 3-3, Fig. 1 ) will exit the sampling time
setting function, the setting value will not be saved
into the memory.
SP-t
02
seconds
adjustment ( flash )
button " ( 3-7, Fig. 1 ) to
▼
button " ( 3-7, Fig. 1 )
▼
12