Lutron Electronics TM-946 Manual page 12

b)Auto Data Logger ( Sampling time should select
to 1 second to 59 minutes and 59 seconds )
Press the " Logger button " ( 3-8, Fig. 1 ) once to start
the Data Logger function. The REC symbol will flash per
2 second and the beeper will sound when save the data
into the memory. Now the Date Logger function is
executed.
Manual Data Logger ( Sampling time should set
to 0 second )
Press the " Logger Button " ( 3-8, Fig. 1 ) once will save
the data one time into the memory, at the same time
the symbol " REC " will flash once and the beeper will
sound.
Memory full
When execute the data logger function, if the upper left
display show " FULL ", it indicate the memory data
already over 16,000 no. and the memory is full.
c) During the Data Logger function is executed, press the
" Logger Button " ( 3-8, Fig. 1 ) once will stop the
data logger function, the " REC " symbol will stop to
flash.
If press the " Logger Button " ( 3-8, Fig. 1 ) once again
will continuous the Data Logger function.
10