Safety Issues - Linak Homeline TWINDRIVE TD4 Advanced User Manual

Furthermore take care about the connecting wires from the power supply to
the TD4 Advanced, don't damage this by overrun.
Assure free space for movement of application in both directions to avoid
blockade.
The appliance is only to be used with the power supply unit provided with the
appliance.

Safety issues

The builder of the equipment shall ensure that the use of the component
complies with relevant standards – like the Machine Directive. Care must be
taken to avoid squeezing of cables as it can cause movement of the system!
The SMPS001/002/006 must not be packed in heat insulating material, but
must be placed so that it can emit waste heat to the surroundings. There are
no ventilation holes to consider, the SMPS emits heat through its surface.
Only the power supply type SMPS001, SMPS002 or SMPS006, shall be used
with the system (TD4 Advanced).
It is possible only to use 1 power supply (SMPS001, SMPS002 or SMPS006)
for 2 TD4 systems. Remember speed may decrease when running 2 systems at
the same time.
Page 5 of 37