Repairing Cylinder Adn; Structure Of The Covers; Structure Of The Bearing Cap; Structure Of Cover With Clamping Unit Kp - Festo ADN-KP Series Repair Instructions

5 Repairing cylinder ADN-...-KP
5.1

Structure of the covers

5.1.1

Structure of the bearing cap

3
5.1.2

Structure of cover with clamping unit KP

5
5.2

Removing the covers

• ADN-20 to 63-...-KP
– Loosen the fl ange screws in the bearing cap and and end cap and
remove them.
– Pull the bearing cap away from the piston rod.
– Remove the end cap from the cylinder barrel.
– Loosen the fl ange screws in the cover with clamping unit KP and remove
them.
– Pull the cylinder barrel from the piston rod.
– Remove any residue of the screw locking agent from the threads of the
screws.
20 / 36
1 Bearing
2 Bearing cap
3 Piston rod seal
1
2
1 O-ring
2 Bearing
1
3 Clamping unit KP cover
4 Piston rod seal
2
5 Location hole for clamping unit KP
3
4
Festo 7ADN-KP_ADN-ELa_en