Cell Output Control; Water Balance And Chemistry Recommendations - Autopilot ChlorSync CS30 Owners & Installation Manual

Cell Output Control

®
The ChlorSync display will show the selected sanitizer output % and cell polarity during normal
△
operation. The
When paired with the PoolSync
To increase or decrease sanitizer output %:
▽
1. Press the
increase output by 1%. Press and hold for 10% increments or decrements.
2. The current sanitizer output will begin to flash on the display. The sanitizer output can be adjusted at
this time.
△
3. Release the
normal operation.
The rotating character shown on the left side of the display informs that the unit is generating
chlorine. If the rotating character is not present, the cell is not generating chlorine at that time but
will do so shortly.
A clockwise motion denotes forward polarity on the blades and a counter-clockwise denotes reverse
l
polarity.
Boost Mode On/Off
The Boost feature is used to increase the sanitizer output from its normal setting to 100% for a
cumulative 24 hour period of circulation pump run time. During this time, the sanitizer output
display will show "100%" as well as the hours remaining in the boost period. When the boost
period expires or is manually terminated, the sanitizer output % returns to its previous setting
and normal operation.
△ ▽
Press the or
l

WATER BALANCE AND CHEMISTRY RECOMMENDATIONS

Water balance is the relationship between different chemical measurements in your pool water.
A pool that is balanced has proper levels of pH, Total Alkalinity and Calcium Hardness.
Balanced water can also be defined as water that is not corrosive or scaling. Water that is not
balanced can damage equipment and pool surfaces.
Proper water chemistry levels are essential to maintain safe and consistent swimming pool
operation. Sanitizers are used to destroy harmful or otherwise objectionable organisms.
Stabilizer or Cyanuric Acid (CYA) is used in many regions to reduce unnecessary loss of
chlorine to sunlight. Salt is used by the ChlorSync
Please note the following recommended water chemistry parameters are for residential pool/spa
applications only. Follow local regulatory guidelines for any commercial pool applications.
▽
or buttons are used to adjust the sanitizer output % to the desired level.
option, consult the PoolSync
TM
button one time to decrease sanitizer output by 1%, or the
▽
or button when the desired sanitizer output is reached. The unit will resume
Rotating character shown clock-wise
buttons simultaneously to turn Boost Mode on or off.
app for more information.
TM
Figure 5
®
to generate chlorine sanitizer.
△
button one time to
Page - 9