Output Signal Setting - Mitsubishi Electric FR-A7AY E kit-SC Instruction Manual

4.5.3

Output signal setting

Set the output signals to be monitored. Set Pr. 306 to output the same signal from terminals AM0 and AM1
and Pr. 306 and Pr. 310 to output different signals. For details of signal definitions, refer to Pr. 54 and Pr. 158
of the inverter instruction manual.
Pr. 306/Pr. 310
Setting
1 Output frequency
2 Output current
3 Output voltage
5 Frequency setting
7 Motor torque
8 Converter output voltage
9 Regenerative brake duty
10 Electronic thermal relay function load factor
11 Output current peak value
12 Converter output voltage peak value
14 Output power
21 Reference voltage output
24 Motor load factor
52 PID set point
53 PID process value
61 Motor thermal load factor
62 Inverter thermal load factor
Types of Monitor
EXTENSION ANALOG OUTPUT
Increments Full-Scale Value
0.01Hz Pr. 55
0.01A Pr. 56
200V class : 400V
0.1V
400V class : 800V
0.01Hz Pr. 55
Rated torque of the applied motor × 2
0.1%
200V class : 400V
0.1V
400V class : 800V
0.1%
Pr. 70
0.1% 100%
0.01 Pr. 56
200V class : 400V
0.1V
400V class : 800V
Rated inverter power × 2
0.01kW
⎯ ⎯
0.1% 200%
0.1% 100%
0.1% 100%
0.1% Thermal relay operation level (100%)
0.1% Thermal relay operation level (100%)
4
21