Flow Rate, Differential Pressure; And Viscosity P; Characteristics - HYDAC FILTER SYSTEMS ContaminationSensor CS 1939 Series Operating And Maintenance Instructions Manual

Flow rate, differential pressure

Differential pressure
indicated in the figures below apply regardless whether the direction of flow is
A->B or B->A.
Note that the permissible measured volumetric flow is 30 ... 500 ml/min.
If you are unable to achieve the required flow values, we offer an extensive
line of accessories with various conditioning modules.
For example:
You are using a fluid with a viscosity
 of ≈0.9 bar, so that you achieve a flow rate of approx. 200 ml/min.
p
The flow rate depends on the viscosity of the medium and the differential
 via the sensor.
pressure
ContaminationSensor CS 1939
BeWa CS1939 3978342c V100 en-us 2019-10-08.docx
 and viscosity
p
 and viscosity
p
p
Assembly, installation and commissioning


characteristics


characteristics. All the values
 of 46 mm²/s at a pressure difference
en
Page 28 / 48
2019-10-08