Proper/Designated Use - HYDAC FILTER SYSTEMS ContaminationSensor CS 1939 Series Operating And Maintenance Instructions Manual

Proper/designated use

Claims for defects or liability, regardless of the legal foundation, do not apply
with incorrect or improper installation, commissioning, usage, handling,
storage, maintenance, repair, use of unsuitable components or other
circumstances for which the manufacturer is not responsible.
The manufacturer assumes no responsibility for determining the interfaces
for installation in a system or the installation, use or functionality of the
product in this system.
Use the product only for the application described below.
The ContaminationSensor CS 1939 serves to continuously monitor solid
particulate contamination in hydraulic and lubrication systems.
Intended use of the product also extends to the following:
- Observing all instructions in the instruction manual.
- Performing inspection and maintenance work.
Depending on the version (see model code), you may use the CS only in
connection with the following media:
Impermissible operating media
The ContaminationSensor will be destroyed.
►
The ContaminationSensor may only be used in connection with
mineral oils or mineral oil-based raffinates.
►
Note the maximum operating pressure of 350 bar / 5075 psi.
ContaminationSensor CS 1939
BeWa CS1939 3978342c V100 en-us 2019-10-08.docx
NOTICE
en
Product overview
Page 17 / 48
2019-10-08