Product Overview - HYDAC FILTER SYSTEMS ContaminationSensor CS 1939 Series Operating And Maintenance Instructions Manual

Product overview

The ContaminationSensor CS 1939 is a stationary measurement unit for the
continuous monitoring of particulate contamination in hydraulic and
lubrication systems.
The ContaminationSensor is designed to be used in low- or high-pressure
hydraulic and lubrication circuits and test benches where a small amount of
oil (30–500 ml/min) is diverted for measurement purposes.
The ContaminationSensor is approved for a maximum operating pressure
(see specification on type label) and viscosity of up to 1000 mm²/s.
The particulate contamination is recorded by an optical measurement cell.
ContaminationSensor CS 1939
BeWa CS1939 3978342c V100 en-us 2019-10-08.docx
en
Product overview
Page 14 / 48
2019-10-08