Installing The Burette - Thermo Scientific Orion Star T900 Series User Manual

Installing the Burette

Figure 5. Positioning the Burette
Holding the center of the glass burette, gently align
the piston ball on the bottom of burette (a) with the
clasp on the titrator (b):
Seat the glass cylinder of the burette onto the
alignment rings of the titrator by gently pressing
down on the burette:
Place the burette cover over the burette, gently
screw on the cover and ensure the top of the burette
is aligned with the opening on the cover:
Orion Star T900 Series Titrator 13