Barco QHD (2.1-3.0:1) Lens Installation Manual page 6

2. Installing the lens
Image 2-2
2. Bring the basket towards the projector and press on it so as to lock it at the top.
2.2.2 Removing the lens cover
Necessary tools
cross headed screwdriver
How to remove the lens cover ?
1. Loosen the 2 indicated screws.
Image 2-3
2. Open the protective cloth (enlarge the opening) and pull the lens cover gently towards the front of the projector.
2.2.3 Removing the installed lens
How to remove the installed lens ?
1. Disconnect the lens from the motor connection board
2. Support the lens with one hand.
4 R5976893 QHD (2.1-3.0:1) LENS 22/03/2006