Advertisement
Photo may show a different but similar end panel. Zipper quantity may differ. Some panels are without zippers.
©2012 ClearSpan™
All Rights Reserved. Reproduction
is prohibited without permission.
Revision date: 06.21.12
ClearSpan
End Panel Installation
™
STK#
R020B00002_03_04_05_06 (all colors)
R024B00002_03_04_05_06 (all colors)
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ClearSpan R020B00002
Summary of Contents for ClearSpan R020B00002
- Page 1 End Panel Installation Photo may show a different but similar end panel. Zipper quantity may differ. Some panels are without zippers. STK# R020B00002_03_04_05_06 (all colors) ©2012 ClearSpan™ R024B00002_03_04_05_06 (all colors) All Rights Reserved. Reproduction is prohibited without permission. Revision date: 06.21.12...
- Page 2 Important Information READ THIS DOCUMENT BEFORE YOU BEGIN! Thank you for purchasing this ClearSpan™ end panel kit. This guide includes helpful hints and important information needed to safely attach and properly maintain the end panel. Please read these instructions before you begin.
- Page 3 The following steps will ensure that you have all the The steps below describe attaching a typical end panel to a typical end frame of a ClearSpan™ building with a necessary parts before you begin. roll-form frame. (See photo on previous page for rafter Unpack the contents of the shipment and place where outline.) Verify that all parts are included in the shipment.
- Page 4 End Panel Design Typical End Panel Design End Panel Flap Zippers (if equipped) D-rings D-rings Horizontal Pocket End Panel Skirt Panels include evenly-spaced D-rings attached along the top edge. This end panel is typically shipped as shown above. During installation, metal pipe is assembled and inserted D-Rings into the horizontal pocket (if present).
- Page 5 Fabric End Panel Installation FABRIC END PANEL INSTALLATION With the temporary straps (or customer-supplied rope) in place, pull the end panel up to the end rafter and The following procedure describes installing an end panel secure the end panel to the end rafter using small that includes D-rings at the top.
- Page 6 Horizontal Conduit Installation FABRIC END PANEL INSTALLATION (continued) PLAIN END PANEL: HORIZONTAL CONDUIT INSTALL Once the end panel is temporarily secured, take the A plain end panel includes a horizontal pocket. Pipe is roll of black strapping and weave the end of the strap assembled and inserted into this pocket.
- Page 7 HORIZONTAL CONDUIT INSTALL (continued) CARE AND MAINTENANCE Once the ratchets are attached, make a horizontal slit Proper care and maintenance of your ClearSpan™ (approximately 3"– 4" long) in the horizontal pocket end panel and its components is important. Check the containing the conduit directly above each ratchet.
Need help?
Do you have a question about the R020B00002 and is the answer not in the manual?
Questions and answers