Johnson Controls PENN VFD68 Product Bulletin page 4

Operation Panel for 575 VAC Models
RUN
RUN key STOP/RESET key
Table 2: Operation Panel Keys
Key Description
Used to give a start rotation command.
RUN
• Used to stop operation.
STOP
• Used to reset the VFD68 Drive when the output stops due to activation of the protection function.
RESET
Used to select the operation mode or setting mode.
MODE
Used to determine the frequency and parameter settings.
SET
• Used to increase or decrease the running frequency consecutively. Hold down the key to change the
frequency.
• Used to change the parameter setting consecutively, when in the setting mode. Press the key to change
the parameter setting.
Used to give a forward rotation command.
FWD
Used to give a reverse rotation command.
REV
• Used to stop operation.
STOP
• Used to reset the VFD68 Drive when the output stops due to activation of the protection function.
RESET
Table 3: Unit Indications and Operating Status Indications
Indication Description
Hz Lit to indicate frequency
A Lit to indicate the current (Amperes)
RUN Lit to indicate drive operation
Steady light = forward rotation
Flickering light = reverse rotation
MON Lit to indicate monitor display mode
PU Lit to indicate the PU operation mode
EXT Lit to indicate the external operation mode
4 VFD68 Variable Frequency Drives Product Bulletin
COVER OPENED:
Setting key
Mode key
SET
RESET
Forward key STOP/RESET key UP/DOWN key
Figure 3: Operation Panel
Unit indication
Operation status
indication
Reverse key
REV