INSTALLATION
Installing an indoor unit
Stand type
1 . The indoor unit should be installed in a place where there is no obstacle around the product, where pipe or electric work
can be conveniently carried out and where the indoor unit cannot be shaken or fall by vibration or external shock .
2 . Drill a hole at a slightly downward slant (15˚) with a diameter of 60~65 mm .
Indoor
Ø60~65 mm
3 . Select the pipe direction and drill a hole on the cover of the indoor unit by knocking the cover with a hand or tool .
- Pipe can be installed on left, right, or rear side of the indoor unit .
f When the hole for the drain pipe on the wall is
f
lower than the hole for drain hose connection
DVM PAC Mirage_IM_05674A-00_EN.indd 8
Outdoor
ENGLISH-8
f When the hole for the drain pipe on the wall is higher
f
than the hole for drain hose connection
2016-04-04 오전 11:46:06