Tools; Technical Data - Hilti TE 6-A36 Operating Instructions Manual

3 Tools

Designation
Hammer drill bits
Anchor-setting tools
Quick-release chuck for wood and metal drill bits
Keyed chuck
Wood drill bits
Wood drill bits (auger bits)
Metal drill bits (for steel)

4 Technical data

Right of technical changes reserved.
Power tool
Rated voltage (DC voltage)
Weight in accordance with EPTA procedure 01/2003
Dimensions (L x W x H)
Drilling speed without hammering
Hammer drilling speed
Speed under no load in hammer drilling mode
Single impact energy in accordance with EPTA proced-
ure 05/2009
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information (measured in accordance with EN 60745‑2‑6):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level.
Uncertainty for the given sound level
Triaxial vibration values (vibration vector sum)
Hammer drilling in concrete, a
Drilling in metal, a
h, D
Uncertainty (K) for triaxial vibration value
Other information about the power tool
Chuck
h, HD
Description
∅ 5...16 mm
C-type connection end
With smooth shank, hexagonal shank
With smooth shank, hexagonal shank
∅ 3...20 mm
∅ Max. 14 mm
∅ 3...10 mm
TE 6‑A36‑AVR(03)
36 V
4.0 kg
344 mm x 94 mm x 215 mm
1,010/min
940/min
1,040/min
2.0 J
99 dB (A)
88 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑6
9 m/s²
< 2.5 m/s²
1.5 m/s²
TE‑C Click
en
17