Download Print this page

NovaStar MCTRL660 PRO Quick Start Manual page 2

Independent controller
Hide thumbs Also See for MCTRL660 PRO:

Advertisement

Cascading Devices
Method 1
The control computer needs to control multiple MCTRL660
PRO devices. Up to 8 devices can be cascaded.
QuickScreenConfiguration
Step 1 Setting Input Source
Supported input sources include 3G-SDI, single-link DVI and HDMI 1.4a.
Step 1  On the home screen, press the knob to enter the menu.
Step2  Chose Input Settings > Input Source to enter its submenu.
Step3  Select the target video source and press the knob to enable it.
Step 2 Setting Input Resolution
Method 1: Selecting a Preset Resolution
Select an appropriate preset resolution and refresh rate as the input resolution.
Step1  On the home screen, press the knob to enter the menu.
Step2  Choose Input Settings > Preset Resolution to enter its submenu.
Step3  Select a resolution and a refresh rate, and press the knob to apply them respectively.
Method 2: Customizing a Resolution
Customize a resolution by setting a custom width, height and refresh rate.
Step1  On the home screen, press the knob to enter the menu.
Step2  Choose Input Settings > Custom Resolution to enter its submenu and set the screen width, height and refresh rate.
Step3  Select Apply and press the knob to apply the custom resolution.
Step 3 Setting Color Depth
Set the color depth of input source, including 8-bit, 10-bit and 12-bit.
Step1  On the home screen, press the knob to enter the menu.
Step2  Choose Input Settings > Color Depth to enter its submenu, select a color depth and press the knob to apply it.
Step 4 Quickly Configuring Screen
This function is used to quickly configure a screen.
Method 2
Multiple MCTRL660 PRO devices need to output image
synchronously. Up to 8 devices can be cascaded.
3
QuickScreenConfiguration
应⽤场景
Step1 On the home screen, press the knob to enter the menu.
Step2 Choose Screen Settings > Quick Config to enter its submenu.
Step3 Enable Quick Config and set the parameters.
Set Cabinet Row Qty and Cabinet Column Qty (number of cabinet rows and columns to be loaded).
Set Port 1 Cabinet Qty (number of cabinets loaded by Ethernet port 1). The device has restrictions on the number of cabinets loaded by
the Ethernet ports. For details, see Note a).

Set Data Flow of the screen. For details, see Note c), d), and e).
Note
a). If n ports are used to load the screen, the
Example:
number of cabinets loaded by each of the first
If all the 6 Ethernet ports are used to load the screen, the number of cabinets loaded
(n–1) ports must be the same and the integral
by ports 1–5 must be the same and the integral multiple of the number of cabinet
multiple of the number of cabinet rows or
rows or columns. Therefore, you need to set only the number of cabinets loaded by
columns, and it cannot be less than the
port 1 according to the actual situation. The number of cabinets loaded by port 6 must
number of cabinets loaded by the last port.
be less than or equal to the number of cabinets loaded by port 1.
b). Irregular screens must be configured in NovaLCT.
c). Rotate the knob to select the target data flow which can be previewed on the LED screen in real time and then press the knob to
save the one you selected.
d). Ensure that the cabinets loaded by each Ethernet port are connected one by one in the same direction.
e). Ensure that the Ethernet port 1 is at the beginning position of the whole physical connection.

Firmware
Update
应⽤场景
Method 1: NovaLCT
In NovaLCT, perform the following steps to update the MCTRL660
PRO firmware.
Step1 Start NovaLCT and choose User > Advanced Synchronous
System User Login and log in as an advanced user.
Step 2 Type the secret code "admin" to enter the program loading
page.
Step 3 Click Browse to select the update program path and then click
Update.
Specifications
应⽤场景
Input voltage
100 V–240 V AC
Rated power consumption
20 W
Operating temperature
-20°C–60°C
Operating humidity
0% RH–90% RH, non-condensing
Dimensions
482.6 mm × 356.0 mm × 50.1 mm
Net weight
4.6 kg
Space requirement
1U
4
Method 2: SmartLCT
In SmartLCT, perform the following steps to update the MCTRL660
PRO firmware.
Step1Start SmartLCT and enter the V-Sender page.
Step2In the properties area on the right, click
to enter the
Firmware Upgrade page.
Step3Click
to select the update program path.
Step4Click Update.
Packing
应⽤场景
Carrying case: 550 mm × 440 mm × 175 mm, white cardboard box
Packing box: 530 mm × 140 mm × 410 mm, craft paper box
Accessory box: white cardboard box
1 × MCTRL660 PRO unit
1 × Ethernet cable
1 × DVI cable
1 × USB cable
1 × HDMI cable
1 × Power cord

Advertisement

loading