Ricoh OP-P1 Service Training page 93

 Finally, the paper passes through the exit roller (3) and is
stacked face-down on the output tray.
 When there is no paper in the tray, a feeler falls through a
cutout in the bottom plate, triggering the paper end sensor.
 The by-pass set sensor (11) detects when paper is set in
the bypass tray.
Slide 93
1. Paper Exit Sensor
2. Fusing Exit Roller
3. Paper Exit Roller
4. Hot Roller
5. Pressure Roller
6. Drum (inside AIO)
7. Transfer Roller
8. Registration Sensor
9. Paper
10. Feed Roller
11. By-pass Set Sensor
12. Paper End Sensor
13. Paper Transport Roller
Mechanism - 3
93
OP-P1/MF1 Training