Ricoh OP-P1 Service Training page 92

 The paper passes between the drum (6) and the transfer roller (7).
The transfer roller pulls the toner image from the drum onto the
paper.
 The toner image is fused onto the paper when it passes between
the hot roller (4) and pressure roller (5).
 The paper exit sensor (1) detects the leading edge and trailing
edges of the paper.
 The sensor will trigger a jam alert if the leading and trailing edge
Slide 92
1. Paper Exit Sensor
2. Fusing Exit Roller
3. Paper Exit Roller
4. Hot Roller
5. Pressure Roller
6. Drum (inside AIO)
7. Transfer Roller
8. Registration Sensor
9. Paper
10. Feed Roller
11. By-pass Set Sensor
12. Paper End Sensor
13. Paper Transport Roller
Mechanism - 2
do not pass within the correct time for the length of the paper
(determined by the selected paper size).
92
OP-P1/MF1 Training