The print cartridge is called the AIO (all-in-one) throughout
this course.
All models in the series use the same AIO.
There are no serviceable parts inside the AIO.
Disassembly of an AIO is never required.
When the AIO runs out of toner, the toner waste tank can
be emptied and the toner supply tank can be refilled.
All models except the the Europe and N. America models
(M145, M146, M147, M148, M149, M150, and M151): An
AIO can be refilled up to three times (this is the
approximate service life of the drum). The refillings greatly
extend the service life of the AIO.
The AIO can be easily removed and replaced by the user.
The AIO has an ID chip which helps the machine to detect
when an AIO is set and when a new AIO has been installed.
Slide 75
The machine detects that an AIO has been refilled when toner end is no longer
detected, but the ID chip is not for a new AIO.
Introduction
75
OP-P1/MF1 Training