Usersetcontrol - Toshiba BU302MG Instruction Manual

UserSetControl

You are able to save a user setting to the non-volatile memory of the camera. There are 15 user memory
channels for user setting.
By using user memory, you are able to restore frequent used settings at the time of next start-up.
The following table is the list of registers applied to "UserSetLoad"/"UserSetSave".
Category
ImageFormatControl
AcquisitionControl
TriggerControl
ExposureControl
DigitalIOControl
CounterAndTimerControl
(*) DPC and SequentialShutter entries are stored to a single channel. Entries are shared with all channels.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Table: List of registers to be applied to UserSet
Register
ImageFormatSelector
Width
Height
OffsetX
OffsetY
Binning
Decimation
Reverse
PixelFormat
TestPattern
AcquisitionFrameRate
TriggerMode
TriggerSequence
TriggerSource
TriggerAdditionalParameter
TriggerDelay
ExposureTime
LineModeAll
LineInverterAll
UserOutputValueAll
LineSelector
LineSource
TimerTriggerSource
TimerDuration
TimerDelay
Category
AnalogControl
LUTControl
EventControl
VendorUniqueControl
DPCControl
SequentialShutterControl
63 / 81
http://www.toshiba-teli.co.jp/en/index.htm
Register
Gain
BlackLevel
Gamma
LUTEnable
EventNotification
FrameSynchronization
LEDIndicatorLuminance
AntiGlitch
AntiChattering
DPCEnable(*)
DPCNumber(*)
DPCEntryX(*)
DPCEntryY(*)
SequentialShutterEnable(*)
SequentialShutterTerminateAt(*)
SequentialShutterEntry(*)
D4253386A