Digital Output - Samsung DVD-SH855M Instruction Manual

HDD & DVD RECORDER Audio
HDD
Library

Digital Output

: PCM
PCM
DTS : Off
Bitstream
Guide
DRC : On
Channel
NICAM : On
Timer Record
V-Mode Compatibility : Off
Disc Manager
Setup
MOVE SELECT RETURN
m s r e
HDD & DVD RECORDER Audio
HDD
Library
Digital Output : PCM
DTS : Off
Guide Off
DRC : On
On
Channel
NICAM : On
Timer Record
V-Mode Compatibility : Off
Disc Manager
Setup
m MOVE s SELECT r RETURN e
HDD & DVD RECORDER Audio
HDD
Library
Digital Output : PCM
DTS : Off
Guide
DRC : On
Off
Channel
NICAM : On
On
Timer Record
V-Mode Compatibility : Off
Disc Manager
Setup
m MOVE s SELECT r RETURN e
HDD & DVD RECORDER Audio
HDD
Library
Digital Output : PCM
DTS : Off
Guide
DRC : On
Channel
NICAM : On
Off
Timer Record
V-Mode Compatibility On : Off
Disc Manager
Setup
m MOVE s SELECT r RETURN e
Digital Output
•
PCM : Select this when your equipment is not decode Dolby Digital (or
MPEG-2) compatible.
|
•
Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream.
|
|
Select this when your AV receiver or AV amplifi er has a
|
Dolby Digital (or MPEG-2) Decoder.
|
M

EXIT
Digital output setting is equally applied to both Dolby Digital and
MPEG-2 audio. LPCM sound track is always outputted as PCM. It has
no relation with Digital Output setting.

Be sure to select the correct Digital Output or you will hear no
sound or a loud noise.
DTS
•
Off : Doesn't output DTS signal. Select this when your AV receiver (or AV
amplifi er) does not have DTS decoder.
|
•
On : Outputs DTS Bitstream via digital output when you play DTS track.
|
|
Select this only when your AV receiver (or AV amplifi er) have DTS
|
| decoder.
M
EXIT

To output DTS signal, Bitstream must be selected.

When DTS soundtrack is played, sound does not output from AV
Audio Output.
DRC
This is only active when a Dolby Digital signal is detected.
•
On : When Movie soundtracks are played at low volume or from smaller
|
| speakers, the system can apply appropriate compression to make
|
low-level content more intelligible and prevent dramatic passages
|
|
from getting too loud.
•
Off : You can enjoy the movie with the standard Dynamic Range.
EXIT
NICAM
NICAM programmes are divided into 3 types. NICAM Stereo, NICAM
Mono and Bilingual (transmission in another language). NICAM
|
programmes are always accompanied by a standard mono sound
|
|
broadcast and you can select the desired sound by setting NICAM on or
|
off .
|
•
On : NICAM mode
•
Off : Only set at this position to record the standard mono sound during
EXIT
a NICAM broadcast if the stereo sound is distorted due to inferior
reception conditions.
English - 35