Digital Output; Dynamic Compression - Samsung DVD-HR720 Instruction Manual

Digital Output

1. PCM : Select this when your equipment is not
Dolby Digital compatible.
2. Bitstream : Outputs Dolby Digital (or MPEG-2)
audio as bitstream. Select this
when your AV receiver or AV
amplifier has a Dolby Digital (or
MPEG-2) Decoder.
Be sure to select the correct Digital
I
Output or you will hear no sound or a
NOTE
loud noise.
DTS
1. Off : Doesn't output DTS signal. Select this
when your AV receiver or AV amplifier
does not have DTS decoder.
2. On : Outputs DTS Bitstream via digital output
when you play DTS track. Select this only
when your AV receiver (or AV amplifier)
have DTS decoder.
When DTS soundtrack is played, sound
I
does not output from AV Audio Output.
NOTE

Dynamic Compression

This is only active when a Dolby Digital signal is
detected.
1. Off : You can enjoy the movie with the
standard Dynamic Range.
2. On : When Movie soundtracks are played at
low volume or from smaller speakers, the
system can apply appropriate
compression to make low-level content
more intelligible and prevent dramatic
passages from getting too loud.
English - 43