Using The Video Plus+ Feature - Samsung DVD-SH855M Instruction Manual

HDD & DVD RECORDER Timer Record
HDD
Library Video Plus+
Scheduled List
Guide
Video Plus+ Extened : Off
Channel
Recorded List
Timer Record
Disc Manager
Setup
m MOVE s SELECT r RETURN e
HDD & DVD RECORDER Video Plus+
HDD
Library
Guide
Enter Video Plus+ Code number. [0-9]
Channel
Timer Record
(Press [OK] button : Make Code.)
Disc Manager
Setup
0-9 NUMBER SELECT RETURN EXIT
s r e
HDD Scheduled List
Current Time 10:54
No. To Source Date Start End Mode PDC
No. 01 No Title Add a list
To Source Date Start End Mode PDC
HDD – – JAN 01 10 : 54 12 :54 SP Off
Recordable Time HDD 108:14 SP Title s Save
Recordable Time HDD 65:19 XP
Recorded List
< MOVE s SELECT r RETURN e

Using the Video Plus+ Feature

|
|
Before presetting your HDD & DVD Recorder.
|
|
• Switch on both the television and your HDD & DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset
EXIT
1. With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Timer Record, then press the OK or ►
2.
button.
Press the ▲▼ buttons to select Video Plus+, then press the OK or ►
3.
button.
•
A message is displayed to allow you to enter the Video Plus+ code.
4. Press the number buttons to enter the code of the programme that
you want to record in your television magazine.
•
If you want to correct the Video Plus+ code that you are entering:
- Press the ◄ button until the digit to be corrected is cleared.
- Enter the correct digit.
5. Press the OK button.
•
The information concerning the programme is displayed.
EXIT
•
When using the Video Plus+ function for the fi rst time with stored
stations, the programme number fl ashes. This one time, you must
enter the PR number manually by pressing the ▲▼ buttons.
6. Press the RED(A) button if you do not want to use the default title
name.
The rename screen is displayed.
Follow steps 4 and 5 of "Renaming (Labeling) a Title" on page 81.
7. If the programme and times are correct, press the OK button.
8. Turn the power off by pressing the STANDBY/ON button to activate
the timer recording setting.
•
Refer to pages 74~75 if you want to
- Check whether the timer Recording has set correctly or not.
- Cancel a preset recording.
M

The numbers next to each TV programme listing in the magazines
or newspapers are Video Plus+ code numbers, which allow you to
programme your HDD & DVD Recorder. instantly with the remote
control. Enter the Video Plus+ code for the programme you wish to
record.

Video Plus+ is a trademark of Gemstar Development Corporation.
The Video Plus+ system is manufactured under licence from
Gemstar Development Corporation.
English - 78
SXCVKL