Connecting The Hdd & Dvd Recorder; Additional Connections - Samsung DVD-SH855M Instruction Manual

Connecting & Setting Up
Connecting the HDD & DVD Recorder
This section involves various methods of connecting the
HDD & DVD Recorder to other external components and
required initial setting modes.
You can connect your HDD & DVD Recorder to the
television using the SCART cable if the appropriate input
is available on the television.
1. Connect the RF cable as shown.
2. Connect one end of the SCART cable to the AV1
socket on the rear of the HDD & DVD Recorder.
3. Plug the other end into the appropriate connector on
the television.
4. Plug in the HDD & DVD Recorder and TV
5. Turn on the HDD & DVD Recorder and TV.
6. Press the INPUT SEL. button on your TV remote
control until the Video signal from the HDD & DVD
Recorder appears on the TV screen.
To RF IN
1
To TV
RF Cable
To ANT INPUT
M

The RF cable connection of this product sends
only signals of TV. You must connect SCART cable
or Audio/Video cables to watch output from your
HDD & DVD Recorder.

Additional connections

You can connect your HDD & DVD Recorder to a
External device (VCR/Satellite receiver).
External device (VCR/Satellite receiver)
- DVD mode
2
1. Connect the AV2 connector of HDD & DVD Recorder
and External device (VCR/Satellite receiver) using a
SCART cable.
2. Connect the AV1 connector to the SCART AV
connector on TV.
3
3. Turn on the HDD & DVD Recorder, External device
(VCR/Satellite receiver) and TV.
4. Set Input mode on AV2.
- TV mode
1. Press the TV/DVD button on remote control, then
"TV" appear on Front LED display. (or turn off HDD &
DVD Recorder.)
2. You can watch programmes from a satellite or digital
tuner connected to this HDD & DVD Recorder, even
when the HDD & DVD Recorder is turned off .
English - 18