Samsung DVD-SH855M Instruction Manual page 69

3. Press the REC button.
Information concerning the external input mode is displayed on the
screen, then recording begins. Icon( ) is displayed on the front panel.
To pause recording
•
Press the REC PAUSE button to pause a recording in progress.
•
Press the REC PAUSE button again during pause to resume
recording.
•
You can switch channels by pressing the PROG (
while recording pauses. (Analogue broadcasting only)
M

In DTV mode, if you press the REC PAUSE button:
- The channel will not be switched and the TV/RADIO key is disabled.
- Switching to the analog channel or changing the input source will be
applied after the recording is stopped.

In ANALOG mode, if you press the REC PAUSE button:
- Switching to DTV mode will be applied after the recording is stopped.
To stop recording
Press the STOP ( ) button to stop or fi nish a recording in progress.
•
When using DVD-RAM/±RW/±R discs, the message "Updating the
information of disc. Please wait for a moment" is displayed.
M

You can not change the recording mode while recording.

Recording will stop automatically if there is no free space left for
recording.

Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and
up to 48 titles onto a DVD+RW/+R disc.

Up to 999 titles can be registered on the HDD.

HDD recording is available for up to 24 hours, and when recording
for 24 hours, 3 titles will be recorded with each being 8 hours in
length.

Recording will stop automatically if a copy protected image is
selected.

DVD-RAM/±RW discs must be formatted before starting to record.
Most new discs are sold unformatted.

Do not use DVD-R authoring discs with this unit.
English - 69
) buttons