Table of Contents
Advertisement
H4000(1~33)-Asia94%
3/11/03 11:29 AM
Deciding How to Connect DHR(DVD HDD Recorder)
You must take into account various factors when connecting audio or video systems:
Types of connectors available on your systems
Systems connected permanently to the
(camcorder for example)
Your
DHR
is equipped with the following connectors.
Connector
Location
Type
LINE
Rear/Front
Audio/Video RCA
AUDIO input
Rear
Audio RCA
COMPONENT
Rear
RCA
output
S-VIDEO
Rear
S-JACK
input/output
Digital AUDIO
Rear
Optical
output
coaxial
OUT TO TV
Rear
75
Coaxial
IN FROM ANT.
Rear
75
Coaxial
Whenever you connect an audio or video system to your DHR,
ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed
connection instructions and associated safety precautions.
18
Page 18
DHR
(satellite receiver for example) or temporarily
Direction
Recommended Use
In/Out
Television
Other VCR/DVD
Satellite receiver
In
Audio In for S-VIDEO
Out
COMPONENT out
In/Out
S-Video in/out
Out
Digital Audio out
Out
Television
In
Aerial
Cable television network
Satellite receiver
Connecting DHR(DVD HDD Recorder) to the TV using the Coaxial Cable
To receive television programs a signal must be received from one
of the following sources:
An outdoor aerial
An indoor aerial
A cable television network
A satellite receiver
Make sure that both the television and the DHR are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75 coaxial socket marked IN (PROM
ANT.) on the rear of your DHR.
3
Plug the coaxial cable supplied into the socket marked OUT (TO TV)
on your DHR.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your DHR to the television via the RCA cable
(see section below) if your television is equipped with this type of
connection.
Connecting DHR(DVD HDD Recorder) to the TV using the RCA Cable
Aerial
TV
3
RF coaxial cable
You can connect your
DHR
to the television using the RCA cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
DHR
Simplify the setting up procedure of your
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the DHR is switched off.
Make sure that both the television and the DHR are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the RCA Audio/Video cable to the Video output and Audio L, R output socket on the rear
of the DHR.
3
Plug the other end into the appropriate connector on the television.
2
TV
3
4
2
19
Advertisement
Table of Contents
