Connectors Description; Jtag Connector - Seco Qseven mQ7-C72 User Manual

3.2 Connectors description

3.2.1

JTAG connector

NXP i.MX8 Mini and Nano processors have a system JTAG Controller (SJC) and support two JTAG modes, debug mode and test mode. This interface is
accessible through connector CN1, type JST p/n SM07B-SRSS-TB with the following pinout. Please refer to NXP i.MX8 Mini development reference manual for
correct implementation.
Q7-C72
Q7-C72 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Authors: A.R - Reviewed by M.B. - Copyright © 2021 SECO S.p.A
JTAG Connector- CN1
1 +3.3V_ALW
2 JTAG_TCK
3 JTAG_TMS
4 JTAG_TDI
5 JTAG_TDO
6 JTAG_RST
7 GND
21