Magicfx BUBBLE MONSTER User Manual page 10

7. OPERATING THE BUBBLE MONSTER
OPERATING
Remote controller of the Bubble Monster
OPERATING THE BUBBLE MONSTER
1. Connect the Bubble Monster with the use of the plug to 220V socket. On the display of the
remote control the following message will appear for about 2 -5 seconds:
2. Next the standard menu will appear in the display of the remote control.
3.
appear on the display:
4.
speed.
5.
6. The display now indicates the operational time of the Bubble Monster. This can be increased by
7.
appear in the display:
8.
9.
10.
11. Now that the pr
12.
ng menu will
e time that the Bubble Monster will be
switched off.
appear in the display again.
TIP:
If you would like to operate the Bubble Monster from a distance, take of the
remote control by pressing the click button the XLR plug. Place the remote
control on the desired location and connect it to the Bubble Monster by using a 5
pin XLR cable.
BEWARE:
Only use MAGIC effects pro Bubble Fluid.