Commissioning - Perrot P2S Maintenance And Operating Instructions

5. C ommissioning
There aren't any special measures necessary for commissioning.
Only the rotating speed of the sprinkler has to be adjusted as well as the part circle
operation for the sector, which has to be irrigated.
5.1 Adjustment of Rotation Speed (for agricultural applications)
Turning the regulation screw to the right will lower the rotation speed
Option:
If a "K" is stamped in the speed regulation screw, the sprinkler can be stopped
completely by turning the speed regulation screw to the right (from year of
manufacture 2013).
By turning the regulation screw to the left the rotation speed is increased.
Adjusting screw
TDP057e.doc
Perrot REGNERBAU CALW GmbH Industriestraße 19‐29 / D‐75382 Althengstett / Germany
Phone: 0049‐7051‐162‐0 / Fax: 0049‐7051‐162–133
For minimal speed, the use of clear water is required.
In case dirty water is used, the regulation screw has to be
opened completely; otherwise the sprinkler can stop its
operation.
Rev. 22.10.2014
E‐mail: perrot@perrot.de / E‐mail Technical Department: technik@perrot.de
picture 2
Page 5 / 11