Description; Assembly - Perrot P2S Maintenance And Operating Instructions

3. Description
Recommended operating pressure 5 to 7 bar
Permissible operating pressure 4 to 10 bar
The pressure at the sprinkler must not exceed 10 bar.
For further data please refer to the separate data leaflet.
4. A ssembly
 Threaded connection on the sprinkler is 2½" female thread.
 For sealing the thread, hemp and a jointing compound has to be used e.g. Fermit
special
 To screw on the sprinkler, always use a pipe wrench size 3".
Tighten the sprinkler with around 30Nm.
Pipe wrench 3"
Screw on the connection socket up to the detent, so that the sprinkler cannot unscrew
itself during operation.
TDP057e.doc
Perrot REGNERBAU CALW GmbH Industriestraße 19‐29 / D‐75382 Althengstett / Germany
Phone: 0049‐7051‐162‐0 / Fax: 0049‐7051‐162–133
Do not turn the sprinkler by using the jet pipe.
S prinklers should be installed above head‐height, respectively adopt any
alternative safety measures.
Rev. 22.10.2014
E‐mail: perrot@perrot.de / E‐mail Technical Department: technik@perrot.de
picture1
Page 4 / 11