1.6.8
Instrument Setup
Instrument Setup
Display contrast
TT34 serial number
Battery type
UTC Offset
Units
Coordinate format
Sensor offset
User-fields
Language
Bluetooth
SMS
Optional SW packages
Factory settings
1.6.8.1 Optional Software Packages
With the help of a release code obtainable from Flytec AG or Flytec USA, additional special
functions can be activated.
To enter a release code:
Select Optional SW-Packages from Instrument Setup in the Main Menu and press OK.
•
Highlight the appropriate software package from the Optional Software Packages list.
•
Press OK and the code 30000 will start blinking.
•
Press the
key; the cursor will jump to 30000.
"
•
Use the
!"
keys to set the code obtained from Flytec and press OK
•
The 6040 display will show "Package released."
•
Note: If you enter an incorrect code, the instrument will be locked for a few minutes.
•
1.6.9
SD Card
It is recommended that the 6040 be used with an SD card installed since the instrument will keep a
system log file on the SD card, which can be beneficial when troubleshooting. The following files
can be stored on and read from an SD/SDHC card loaded into the 6040 SD card slot:
Any number of flights (saved as secure IGC Files)
•
Any number of waypoint and route files (file type .GPX only)
•
An unlimited number of air spaces (file type .FAF only)
•
Instrument configuration (file type .CFG only)
•
Operation Manual Flytec 6040
Description
Contrast setting 0–100%
Set TT34 s/n (if used)
Alkaline or NiMH
Offset from UTC ±13hours; add 0.5Hr
m or ft; m/s or ft/min; km/h or mph or
kn; ºC or ºF; km or miles
dd°mm.mmm; dd.ddddd; dd°mm'ss";
UTM; Swiss Grid
Correct pressure sensor to correct
QNH. Contact Flytec for assistance.
Set number of user-fields for each of 3
user pages
Text language (English, German,
French, Spanish, Italian)
Not yet available
Not yet available
Enter feature package release codes
For technician use only.
Reference Factory Default
50%
2.8.1
0
0
Alkaline
2.5
-2; no
m; m/s; km/h;
°C; km
3.5
dd°mm.mmm
n/a
Factory set
1.5
yes: yes: no
English
n/a
n/a
n/a
n/a
1.6.8.1
n/a
n/a
n/a
17