Settings For Dp-Master - Mitsubishi Electric MELSEC iQ-R Series User Manual

Settings for DP-Master

Connect the engineering tool to the CPU module of the DP-Master, and set the parameters.
Creating a new project
1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [Setting Change] button and set the [Module Label] to [Use].
3.
Click the [OK] button to add the module labels of the CPU module.
4.
Set the RJ71PB91V as follows.
[Navigation window]  [Parameter]  [Module Information]  Right-click  [Add New Module]
5.
To enable the data consistency function, set the items under "Basic Setting" as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71PB91V]  [Module Parameter]  [Basic Setting]
7 COMMUNICATION EXAMPLE
7.1 Communication example of I/O data exchanges
7
37