Plastic Cards - Epson DS-530 II User Manual

Specifications of Originals and Placing Originals
Note:
❏ The following shows the maximum lengths according to the scanning resolution.
· 50 to 200 dpi: 6,096.0 mm ( 240.0 in.)
· 201 to 300 dpi: 5,461.0 mm ( 215.0 in.)
· 301 to 600 dpi: 1,346.0 mm ( 53.0 in.)
❏ You need to specify the paper size in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the Epson Scan 2 window by pressing the Detailed
Settings button on the Scan Settings screen.
There are three ways to specify the paper size in Epson Scan 2, if the paper length is 3,048 mm (120 inches) or less,
you can select Auto Detect (Long Paper) to detect the size automatically.
If the paper length is more than 3,048 mm (120 inches), you need to select Customize and enter the size of the paper.
If the paper length is 5,461 mm (215 inches) or less, you can use Detect paper length instead of entering the paper
height. If the paper is longer than 5,461 mm (215 inches), you need to enter both width and height size of the paper.
❏ To guarantee scanning quality, the scanning speed for long paper is slowed down automatically.
❏ Support the long paper at the input side so that it does not drop out of the ADF, and the output side so that the
ejected paper does not fall from the output tray.
Related Information
"Required Settings for Special Originals in Epson Scan 2 Window" on page 79
&

Plastic Cards

Specifications of Plastic Cards
The specification of plastic card you can load into the scanner.
>
Placing Originals
40
>
Plastic Cards