Loading Plastic And Laminated Cards In The Input Tray - Epson WorkForce DS-30000 User Manual

Caution: Be careful when loading the following types of originals, or they may be damaged or may not
scan successfully:
• Originals with uneven surfaces, such as embossed documents
• Curled or wrinkled originals
• Perforated originals
• Originals with labels or stickers
• Carbon-less paper
• Ripped, curled, or wrinkled originals
• Coated paper
Warning: Carbon-less paper contains chemical substances that may damage the rollers inside the
scanner. Make sure you clean the pickup roller and the separation rollers regularly. Scanning carbon-
less paper may reduce the service life of the rollers compared with scanning plain paper.
Note: When attempting to scan these types of originals, note the following:
• Slow down the feeding speed when scanning wrinkled originals, and smooth out the wrinkles if
possible
• Use the optional carrier sheet to scan originals that are delicate or wrinkled
• If originals are incorrectly detected as double feeds, set the DFDS Function to On on the control
panel, or select Off as the Detect Double Feed setting in Epson Scan 2
• Labels or stickers must be firmly adhered to the scanned original with no exposed glue
• Try to flatten curled originals as much as possible
Parent topic:

Loading Plastic and Laminated Cards in the Input Tray

You can load plastic and laminated cards that meet the card specifications in the input tray.
Note: To increase the accuracy of auto size detection when scanning laminated cards, select the
Document Size > Settings > Scan laminated card setting in Epson Scan 2.
Loading Originals in the Input Tray
64