Setting The Document Protection Feature - Epson DS-530 II User Manual

Useful Features
>

Setting the Document Protection Feature

Related Information
"Cleaning Inside the Scanner" on page 148
&
"Straight Lines Appear when Scanning from ADF" on page 169
&
"Glass Dirt Alert Does Not Disappear" on page 169
&
Setting the Document Protection Feature
To reduce damage to the document, scanning stops immediately when the following conditions are detected.
❏ A paper feed error has occurred
❏ A document is fed at an angle
The default setting is On-Medium.
Important:
c
❏ This feature does not prevent all documents from being damaged.
❏ Paper feed errors may not be detected depending on the paper feeding conditions.
1. Start Epson Scan 2 Utility.
❏ Windows 10
Click the start button, and then select EPSON - Epson Scan 2 Utility.
❏ Windows 8.1/Windows 8
Enter the software name in the search charm, and then select the icon displayed.
❏ Windows 7/Windows Vista/Windows XP
Click the start button, and then select All Programs or Programs - EPSON - Epson Scan 2 - Epson Scan 2
Utility.
❏ Mac OS
Select Go - Applications - Epson Software - Epson Scan 2 Utility.
2. Make the following settings on the Scanner Setting tab.
Set Paper Protection to On-Low, On-Medium or On-High.
To enable this feature, select the level of detection you want to use. See the following table for details on each
level.
Level
On-Low
On-Medium
Description
Lower the sensitivity to detect the skew of the originals.
Detect the skew of the stapled originals and the skew that On-Low could not
detect.
132