Epson DS-530 II User Manual page 141

Using the Flatbed Scanner Dock
Note:
❏ Make sure you raise and slide the stopper so that it is a little bit longer than the length of the original. This allows the
ejected originals to be stacked comfortably on the output tray.
❏ The stopper can move forward and backward on the central output extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
Originals longer than A4 (297 mm) to Legal (355.6 mm)
Open and extend the input tray, slide out the output tray extension of the Flatbed Scanner Dock, and then raise the
stopper.
>
About the Flatbed Scanner Dock
141
>
Notes on Using the Flatbed Scanne
...