Envelopes - Epson DS-530 II User Manual

Hide thumbs Also See for DS-530 II:
Table of Contents

Advertisement

Specifications of Originals and Placing Originals
Note:
❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times.
❏ If you cannot find an appropriate size for the original you want to scan in the Document Size list in Epson Scan 2,
select Auto Detect or select Customize to create a custom document size.
When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically
scanned by applying Paper Skew in the Correct Document Skew setting.
❏ Do not leave photos inside the Carrier Sheet for a long time.
❏ Only use the Carrier Sheet designed for your scanner. The Carrier Sheet is automatically recognized by the scanner
by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information
"Carrier Sheet Codes" on page 24
&
"Required Settings for Special Originals in Epson Scan 2 Window" on page 79
&

Envelopes

Specifications of Envelopes
The specification of envelopes you can load into the scanner.
Size
C6
DL
Measurement
114×162 mm (4.49×6.38 in.)
(standard size)
110×220 mm (4.33×8.66 in.)
(standard size)
>
Placing Originals
Thickness
0.38 mm (0.015 in.) or less
55
>
Envelopes
Loading Capacity
5 envelopes

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents