Cutting And Placing Thermal Pads - ekwb EK-Quantum Vector RTX 3080/3090 D-RGB User Manual

Thermal Pad F – 1.0 mm
120 mm
RTX™ 3080/3090:

CUTTING AND PLACING THERMAL PADS

STEP 1
Your GPU water block comes with thermal pads that have to be cut
into smaller pieces to cover all the VRM components, such as COILs,
MOSFETs, and drivers.
1 mm
STEP 1
Replacement thermal pads:
4x Thermal Pad F 1.0mm – (120X16mm) EAN: 3830046996732
STEP 2
Once cut to size, thermal pads should be placed on the PCB, as
illustrated below. EK made sure to provide you with more than an
adequate quantity of thermal pads to complete this Step.
STEP 2
- 7 -
You must remove the protective foil from both sides of the
thermal pad before installation.