Table of Contents
Advertisement
PREPARING THE GRAPHICS CARD
STEP 1
REMOVING THE STOCK COOLER
Place your graphics card on the flat surface and carefully remove the
stock cooler. Do not forget to unplug all the LED and fan connectors.
Pay attention to the following steps in order to install the EK-Quantum
Vector RTX 3080/3090 D-RGB water block onto the graphics card.
STEP 2
CLEANING THE PCB
Wipe off the remains of the original thermal compound using a
nonabrasive cloth or Q-tip, as shown in the sample image, until the
components and circuit board are completely clean. EK recommends
the use of denatured alcohol for removing TIM leftovers.
STEP 2
- 6 -
- Quick Links:
- Connecting the D-Rgb Led Strip
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector RTX 3080/3090 D-RGB and is the answer not in the manual?
Questions and answers