Table of Contents
Advertisement
TESTING THE LOOP
To make sure the installation of EK components was successful, we
recommend you perform a 24-hour leak test.
When your loop is complete and filled with coolant, connect the
pump to a PSU outside of your system. Do not connect power to
any of the other components. Turn on the PSU and let the pump
run continuously.
Inspect all parts of the loop, and in case the coolant leaks, fix the issue
and repeat the testing process. To prevent possible damage, please
ensure that all hardware is dry before the system is powered on.
- 11 -
- Quick Links:
- Connecting the D-Rgb Led Strip
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EK-Quantum Vector RTX 3080/3090 D-RGB and is the answer not in the manual?
Questions and answers