Icom IC-910H Programming Manual page 4

To Make a call
To call a specific radio (selective call):
1. Press the assigned TX Code CH Select key to enter the select mode.
2. Press the assigned TX Code Up key (or up/down keys) to scroll and select the target radio.
3. Press the assigned Call key. This sends the target radio's 5-tone code.
RX Radio:
Memory Ch
Field
5Tone Signaling » Form
5Tone Signaling » RX C.No
RX Code CH (under 5 Tone)
Field
Line 1 » RX Code
2
Setting / Description
Set to EIA
st
Set to 1. Points to 1
RX Radio's ID.
Setting / Description
This particular radio's RX ID.
line in the RX Code CH window: the
© June 2011 Icom America